တမ်းပလိတ်:Infobox park

တမ်းပလိတ်မှတ်တမ်းလက်စွဲ[ကြည့်ရှု] [တည်းဖြတ်] [ရာဇဝင်] [ရှင်းသန့်]

ဤ infobox template ကို ဥယျာဉ်များနှင့် ပန်းခြံများ အတွက် အသုံးပြုနိုင်ပါသည်။

အသုံးပြုပုံ

ဤတမ်းပလိတ်တွင် ရွေးချယ်စရာများစွာ ပါဝင်သော်လည်း အများဆုံး အသုံးပြုလေ့ရှိသည့် ပါရာမီတာများမှာ အောက်ပါအတိုင်း ဖြစ်သည်။

အများဆုံး အသုံးပြုလေ့ရှိသည့် ပါရာမီတာများ		ပါရာမီတာများ အားလုံး
{{Infobox park | name = | photo = | photo_width = | photo_caption = | map = | map_width = | type = | location = | nearest_city = | coords = | area = | created = | operator = | visitation_num = | status = | designation = | open = }}		{{Infobox park | name = | alt_name = | native_name = | native_name_lang = | photo = | photo_width = | photo_caption = | photo_alt = | map = | map_width = | map_caption = | map_alt = | label = | label_position = | relief = | mark = | x = | y = | x% = | y% = | grid_ref_UK = | grid_ref_Ireland = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW =	| region = | dim = | scale = | source = | format = | display = | coords_type = | coords = | coords_ref = | type = | location = | nearest_city = | area = | elevation = | created = | founder = | designer = | etymology = | motto = | operator = | budget = | visitation_num = | visitation_year = | visitation_ref = | status = | awards = | open = | camp_sites = | hiking_trails = | parking = | publictransit = | plants = | species = | collections = | designation = | disturbance = | free_label = | free_data = | other_info = | website = | child = | embedded = }}

ပါရာမီတာ ရှင်းလင်းချက်များ

This table describes all parameters which can be used in build park infobox. Only the name parameter must be assigned a value.

Field name	Description
name	Required. The name of the park. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Hyde Park, London then name=Hyde Park.
alt_name	If there is a common English name for the park use it for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
native_name	name in local language. If more than one, separate using {{plainlist}}.
native_name_lang	ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead.
photo	The name of an image file to be displayed. No special formatting is needed.
photo_width	Can be used to change the display width of the image. The default width is 240 pixels and maximum is 272px,. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or less. For example photo_width=200 and not photo_width=200px. This template allows photo_width=frameless. See Photo display parameters below.
photo_alt	Alt text for the photo, for visually impaired readers. See WP:ALT.
photo_caption	The caption that will appear below the image if one is required.
location	The location of the park. Don't be too precise. County, state and country are good in the USA. If the park is within a city specify the city, state and country. If the park is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
nearest_city nearest_town	Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
Map related parameters
map	The name of the map to be displayed. See Map display methods below.
map_width	Can change the display width the map. The default width is 240 pixels and maximum is 272px, but usually the map can be smaller. For example map_width=200 and not map_width=200px.
map_alt	Alt text for the map. See WP:ALT.
map_caption	The caption that appears below the map if one is required.
label	A text message that will be displayed next to the mark. Works with label_position below. Seldom used.
label_position	Specifies the position of a label with respect to the mark. This is not functional when using the pixel coordinates method for map display. Valid values are left, right, top and bottom. See label above.
relief	Selects a relief map when assigned any value. This is not functional when using the pixel coordinates method for map display. See Map display methods.
mark	The image used for the mark on a map. The default is Red pog.svg. Look here for other images.
x y	Specifies the position of the location marker on a map image. The coordinates of the marker in pixels based on a map with a width of 1000 pixels. The template will scale these values for proper display. See below.
x% y%	Specifies the position of the location marker on a map image. x% specifies the percentage of the distance across the image from the left edge and y% specifies the percentage of the distance down from the top edge. See below.
Coordinate related parameters
grid_ref_UK	If the park is in Great Britain, the British grid reference. For parks outside of Great Britain, this field is not applicable and therefore should be removed if it is present.
grid_ref_Ireland	If the park is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. For parks outside Ireland, this field is not applicable and therefore should be removed if it is present.
coords	For the {{coord}} template. Will not generate a location mark if a map template is used. When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the Coord template. The defaults should be type:landmark and display:inline,title.
lat_d	The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See below.
lat_m	The minutes of latitude.
lat_s	The seconds of latitude.
lat_NS	N if north of the equator, S if south of the equator. Other values will be disregarded.
long_d	The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See below.
long_m	The minutes of longitude.
long_s	The seconds of longitude.
long_EW	E if East of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
coords_ref	Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
coords_type	Type is one way to specify the scale of maps generated by external map websites. See type for valid values. The default value is landmark. If no type is appropriate consider using the scale parameter below.
scale	Determines the zoom factor for external map websites. See scale. The value is 1:10,000 for the default type which is landmark. Using scale=50000 will change the zoom to 1:50,000.
region	A country code. See ISO 3166-2:US, ISO 3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See region.
source	Source of the coordinate data. See source. For example gnis or ngs, etc. It will not be displayed. Not all possible values are recognized.
format	Determines the format of the coordinates displayed. Valid values are dms for degrees, minutes and seconds, and dec for decimal degrees. The default value is dms.
display	Determines where the coordinates will be displayed. Valid values are inline and inline,title and their variants. The default is inline,title and is recommended.
Other parameters
area	Area of the protected park. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
elevation	Elevation of the park if it is noteworthy. The {{convert}} template should be used.
authorized created established designated opened	The date the park was created. See below. Use {{start date}}. For example, for Yosemite National Park, use {{start date|1890|10|1}}.
closed	The date of closure or disestablishment, if applicable.
visitation_num	The number of visitors in a recent year if known.
visitation_year	The year during which the number of visitors was counted.
visitation_ref	Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using <ref>...</ref> tags.
founder	The person who founded the park or garden.
designer	The person who designed the park or garden.
etymology	The etymology of parks name. Should be very brief or only included in the text of the article.
administrator manager operator owner	The agency or organization which controls or owns the park. See below.
budget	Owner/ operator's planned annual expenditure.
open	The hours, days, or months that the park is open.
status	The status of the park. e.g. "Closed for restoration", or "Closed due to budgetary considerations." Sometimes used as an alternative to open. e.g. "Open all year."
designation	The legal protection offered to the park.
awards	Any awards given to the park; for example, Green Flag Award in the UK.
disturbance	Threats to the park, e.g. logging, urban development.
habitat	Type(s) of habitat(s).
plants	Number of individual plants grown.
species	Number of species grown.
collections	Notable plant collections.
parking	Information on the park's parking facilities (e.g. number of spaces or lots).
publictransit	The nearest public transport stop.
free_label	Customisable label.
free_data	Data field used with free_label.
child	Used to embed this template in another. See below.
embedded	Used to embed another template in this one. See below.
website	Website. Use {{URL}}.

Photo display parameters

The parameter photo_width allows several options:

Option	Description
photo_width=	If no value is assigned, the photo image will display with a width of 240px.
photo_width=<n>	Where n is any numeric value, the photo image will display with a width of n pixels. The maximum width is 272px.
photo_width=frameless	The photo image will display with a default width of 220px, however, if a user is logged in, they can change this value here. If this option is used, the upright parameter is made available. For example |photo_width=frameless|upright=1.2 will cause the image to display with a width of (220 * 1.2)px or 264px. More information about this parameter can be found here.
photo_width=upright	The photo image will display with a default width of 170px. This is equivalent to [[File:Example.jpg|frameless|upright]] using wiki image syntax. More information about the upright option can be found here.

Alternate parameters

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

To display the date the park was created use the most appropriate parameter below:

authorized → ခွင့်ပြု

created → ဖန်တီး

designated → ရွေးချယ်သတ်မှတ်

established → တည်ထောင်

opened → ဖွင့်လှစ်

To display the name of the entity which manages the park use the most appropriate parameter below:

administrator → အုပ်ချုပ်သူ

manager → စီမံခန့်ခွဲသူ

operator → လုပ်ကိုင်သူ

owner → ပိုင်ဆိုင်သူ

နမူနာများ

Tank Hill Park
Tank Hill from below
အမျိုးအစား	သဘာဝ ဧရိယာ
တည်နေရာ	ဆန်ဖရန်စစ္စကိုမြို့၊ ကယ်လီဖိုးနီးယားပြည်နယ်
ကိုဩဒိနိတ်	37°45′36″N 122°26′51″W
ဧရိယာ	၂.၈၇ ဧက (၁.၁၆ ဟက်တာ)
ဖန်တီး	၁၉၇၇ (၁၉၇၇)
လုပ်ကိုင်သူ	San Francisco Recreation and Parks

{{Infobox park
| name          = Tank Hill Park
| alt_name      =
| image         = Tank Hill, San Francisco.jpg
| image_size    = 256
| image_alt     = 
| image_caption = Tank Hill from below 
| map           = San Francisco County
| map_width     = 208
| map_caption   = 
| type = သဘာဝ ဧရိယာ
| location = [[ဆန်ဖရန်စစ္စကိုမြို့]]၊ [[ကယ်လီဖိုးနီးယားပြည်နယ်]]
| coordinates   = {{coord|37|45|36|N|122|26|51|W|region:US-CA_source:gnis|display=inline<!--,title-->}}
| area = {{convert|2.87|acre|2}}
| created = {{start date|1977}}
| operator = San Francisco Recreation and Parks
| visitation = 
| open = 
}}

Edworthy Park
Bow River seen from Edworthy Park
Location of Edworthy Park in Calgary
အမျိုးအစား	Urban park
တည်နေရာ	Calgary, Alberta
ကိုဩဒိနိတ်	51°03′41″N 114°09′23″W
ဧရိယာ	၁.၂၇ km2 (၀.၄၉ sq mi)
လုပ်ကိုင်သူ	City of Calgary
ဖွင့်လှစ်	All year

{{Infobox park
| name          = Edworthy Park
| image         = Calgary-Edworthy Park.JPG
| image_size    = 
| image_alt     = 
| image_caption = Bow River seen from Edworthy Park
| map           = Canada Calgary
| map_width     = 192
| map_alt       = 
| map_caption   = Location of Edworthy Park in Calgary
| type          = [[Urban park]]
| location      = [[Calgary]], [[Alberta]]
| coordinates   = {{coord|51|03|41|N|114|09|23|W|display=inline<!--,title-->}}
| area          = {{convert|1.27|km2|abbr=on|2}}
| operator      = [[Calgary|City of Calgary]]
| open          = All year
}}

အခြားကြည့်ရန်

• {{Infobox street}}
• {{Infobox urban feature}}